Installation Procedure
WARNING: This page is about a different variant/trim than selected.
- Place the mount bracket to the engine.
- Install the bolts that secure the mount bracket to the engine.
Tighten: Tighten the bolts to 110 N.m (81 lb ft).
- Install the right mount. Refer to Engine Mount Replacement - Right .
- Balance the powertrain mounts. Refer to Powertrain Mount Balance Procedure - Total Mount .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.
IMPORTANT:
Powertrain mounts must be tightened in sequence.