Crankshaft Balancer Removal

Tools Required 

J 38122-A  Crankshaft Balancer Holder

Fig 1: View Of Harmonic Balancer Holder J38122-A

Courtesy of GENERAL MOTORS CORP.

1. Install the J 38122-A .
2. Remove the balancer retaining bolt and washer. Use the J 38122-A and a breaker bar to prevent the crankshaft from rotating when loosening the bolt.

   Discard the bolt.

   Fig 2: View Of Crankshaft Balancer

   Courtesy of GENERAL MOTORS CORP.
3. Remove the crankshaft balancer assembly.