LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls - 2.2L (L61) - Introduction (2 Of 2)) >> Repair Instructions >> Evaporative Emission (EVAP) Canister Purge Solenoid Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View of EVAP Purge Solenoid Into The Retaining Bracket
    GM897669Courtesy of GENERAL MOTORS CORP.
  1. Slide the EVAP purge solenoid into the retaining bracket.
  2. Connect the purge line quick connects to the EVAP purge solenoid. Push in the connector until a slick is heard, then pull back to confirm positive engagement.
  3. Connect the EVAP purge solenoid harness connector.
scientia non olet · About LEMON Manuals