LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Automatic Transaxle - 4T45-E - Overhaul) >> Off-Vehicle Repair Instructions >> Transmission Cooler Line Seals Removal >> Tool Required

Tool Required

WARNING: This page is about a different variant/trim than selected.

J 45201  Cooler Line Seal Removal

    Fig 1: Inserting J 45201 Into Cooler Line Seal Bore
    GM822722Courtesy of GENERAL MOTORS CORP.
  1. Insert J 45201  collet (2) fully into the cooler line seal bore.
  2. Insert the forcing screw piece of the J 45201  (1) into J 45201  (2) and tighten.
    3. Fig 2: Removing Cooler Line Seal With J 45201
    GM822724Courtesy of GENERAL MOTORS CORP.
  3. Thread the J 45201  collar (2) onto J 45201  (3) and tighten until the tool has removed the seal.
  4. Use a pair of pliers to remove the cooler line seal from J 45201  .
scientia non olet · About LEMON Manuals