LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transaxle - 4T45-E - Service, Diagnosis & Troubleshooting) >> Automatic Transmission Oil Cooler Flushing and Flow Test (J 45096) >> Back Flush Procedure

Back Flush Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of J 45096 & J 35944-440
    GM1212349Courtesy of GENERAL MOTORS CORP.
  1. Connect the J 45096  adapters (1) to the vehicle's transmission oil cooler supply and return lines at the transmission, using J 35944-440  . See Special Tools .
    2. Fig 2: Identifying Black Supply Hose And Clear Waste Hose
    GM1212338Courtesy of GENERAL MOTORS CORP.
  2. Connect the black supply hose (1) to the return line, bottom connector of the transmission, and the clear waste hose (2) to the feed line, top connector of the transmission, to the vehicle cooler lines. This is the reverse flow - backflush direction.
    3. Fig 3: Setting Main Function Switch To FLUSH Position
    GM1212339Courtesy of GENERAL MOTORS CORP.
  3. Turn the main function switch to the FLUSH position. Allow the machine to operate for 30 seconds.
    4. Fig 4: Setting Main Function Switch To IDLE Position
    GM1212341Courtesy of GENERAL MOTORS CORP.
  4. Turn the main function switch to the IDLE position and allow the supply vessel pressure to dissipate.
scientia non olet · About LEMON Manuals