Conditions for Clearing the MIL/DTC
WARNING: This page is about a different variant/trim than selected.
- Any related TCM codes must be cleared before P0700 can be cleared.
- A history DTC clears after 40 consecutive warm-up cycles, if no failures are reported by this or any other emission related diagnostic.
- Clear the MIL and the DTC with a scan tool.
DTC P0700
| Step | Action | Values | Yes | No |
|---|---|---|---|---|
| 1 | Did you perform the Diagnostic System Check - Vehicle? | - | Go to Step 2 | Go to Diagnostic System Check - Vehicle |
| 2 | Observe the DTC Information with a scan tool. Does the scan tool display any engine control module (ECM) DTCs other than P0700? |
- | Go to Diagnostic Trouble Code (DTC) List - Vehicle | Go to Step 3 |
| 3 | Return to the Diagnostic Trouble Code (DTC) List - Vehicle
and select the appropriate transmission DTC. Did you complete the action? |
- | System OK | - |