Engine Fails To Reach Normal Operating Temperature
- Verify that the cooling system is properly filled. Refer to Draining and Filling Cooling System (GE 47716 Fill) or Draining and Filling Cooling System (Static Fill) .
- If the complaint is a low temperature gauge reading, check the temperature gage for proper operation. Connect a scan tool to the vehicle and read the system temperature. Compare this reading to the temperature gauge. Replace the gauge or switch if necessary.
- Refer to Heating Performance Diagnostic in Heating, Ventilation, and Air Conditioning if the complaint is no heat from the HVAC system.
- Verify proper thermostat operation. Refer to Thermostat Diagnosis .