Scan Tool Data List
Instrument Panel Cluster (IPC)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON, engine OFF, brake fluid level normal, and park brake released | |||
| Low Brake Fluid Level | Volts | 2.5 | |
| Park Brake Switch | Inputs for Analog Dash | Off/On | Off |
Engine Control Module
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value | |
| Operating Conditions: Ignition ON, engine On | ||||
| Brake Booster Pressure Sensor | Hybrid Data | KPa | Varies | |
| Brake Press. Sen. 2 | Hybrid Data | KPa | Varies | |
Starter/Generator Control Module (SGCM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
| Operating Conditions: Ignition ON, engine OFF, brake fluid level normal, and park brake released | |||
| Hill Hold Solenoid 1 | PWM on time | Percentage | 2.5 |
| Hill Hold Solenoid 2 | PWM on time | Percentage | 2.5 |
| Hill Hold Solenoid Relay | Enable/Disable | Varies | 2.5 |
| Hill Hold Solenoid Relay | Enable/Disable | Varies | 2.5 |
| Hill Hold Solenoid 1 | Enable/Disable | Varies | 2.5 |
| Hill Hold Solenoid 2 | Enable/Disable | Varies | 2.5 |