Switches of the Inside Rearview Mirror with the Automatic Day-Night Feature, Compass/Temperature Display with OnStar®

The inside rearview mirror has four switches that perform the following functions:

• The on/off switch located at the left side of the mirror performs the following functions:
  • To enable or disable the automatic day-night feature of the mirror. With the ignition in the ON position, depress and hold the on/off switch for 6 seconds to enable the automatic day-night feature of the mirror. A green indicator will illuminate on the mirror when the automatic day-night feature is enabled. To disable the automatic day-night feature of the mirror, depress and hold the on/off switch for 6 seconds.
  • To turn the compass/temperature display on and off. With the ignition in the ON position, depress the on/off switch to turn the compass/temperature display on in Fahrenheit (°F). Depress the on/off switch again to turn the compass/temperature from Fahrenheit (°F) to Celsius (°C). Depress the on/off switch again to turn off the display. The on/off switch is also used to place the compass into a calibration or zone mode. For more information, refer to Compass Calibration and Variance Procedure .
• The three switches on the right side of the mirror are for OnStar® operation. For more information, refer to OnStar Description and Operation in Cellular Communications.