LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Vue Red Line, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumpers >> Repair Instructions >> Impact Bar Replacement - Rear Bumper >> Installation Procedure

Installation Procedure

    Fig 1: View of Impact Bar - Rear Bumper
    GM931310Courtesy of GENERAL MOTORS CORP.
  1. Position the impact bar to the rear end structure.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the rear impact bar to structure bolts.

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

  3. Install the energy absorber. Refer to Energy Absorber Replacement - Rear .
  4. Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper .
scientia non olet · About LEMON Manuals