LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Vue Red Line, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumpers >> Repair Instructions >> Fascia Replacement - Rear Bumper >> Installation Procedure

Installation Procedure

    Fig 1: View Of Rear Fascia Ends
    GM929718Courtesy of GENERAL MOTORS CORP.
  1. Align fascia tabs with outer quarter panel slots.
  2. Firmly push the rear fascia ends into the quarter panel brackets until secure.
    3. Fig 2: View of Fascia - Rear Bumper
    GM929275Courtesy of GENERAL MOTORS CORP.
  3. Install the fascia to body push-in retainers.
  4. Install the rear wheelhouse liners. Refer to Wheelhouse Liner Panel Replacement - Rear in Body Rear End.
scientia non olet · About LEMON Manuals