Removal Procedure
- Remove the rear seat assembly. Refer to Seat Replacement - Rear .
Courtesy of GENERAL MOTORS CORP.
- Remove the anchor bolts from the rear seat buckle.
Courtesy of GENERAL MOTORS CORP.
- Turn the seat over.
- Disengage the cushion drawstring retainers from the rear seat cushion frame.
- Disconnect the remaining cushion cover retainers from the rear seat cushion frame.
- Feed the anchor through to the top of the seat cushion.
- Pull the seat cushion cover and pad over the latch locations.
- Remove the seat cushion cover and pad from the frame.
- Remove the seat cushion cover from the pad by carefully disengaging the hook and loop fasteners.