LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Vue Red Line, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat System >> Diagnostic Information and Procedures >> Heated Seat Inoperative >> Component Testing >> Heated Seat Cushion Element

Heated Seat Cushion Element

  1. Ignition OFF, disconnect the harness connector at the heated seat cushion.
  2. Test for 6-12K ohms of resistance between the signal circuit terminal B and the ground circuit terminal C of the heated seat cushion.
    NOTE: If not within the specified range, replace the heated seat cushion.
  3. Test for 0.5-2.0 ohms of resistance between the supply voltage circuit terminal A and the ground circuit terminal D of the heated seat cushion.
    NOTE: If not within the specified range, replace the heated seat cushion.
scientia non olet · About LEMON Manuals