Removal Procedure
- Disable the SIR system. Refer to SIR Disabling and Enabling Zone 2 and to SIR Disabling and Enabling Zone 6 in SIR.
- Move the front seat to the forward position.
- Remove the rearmost clip from the hinge pillar garnish molding.
- Remove the rear carpet retainer. Refer to Carpet Retainer Replacement - Rear .
- Remove the center pillar upper molding. Refer to Garnish Molding Replacement - Center Pillar Upper .
- Starting at the top of the lower garnish molding, pull at the clip locations to disengage the clips.
- Remove the molding.