LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Vue Red Line, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting Systems >> Diagnostic Information and Procedures >> Under Seat Lighting Malfunction >> Component Testing >> Floor Flood Lamps Assemble Testing

Floor Flood Lamps Assemble Testing

  1. Ignition OFF, disconnect the harness connector at the floor flood lamps assembly.
  2. Install a jumper wire between the control terminal and ground. Install a 3 amp fused jumper wire between the terminal C to test the AMBER light color and terminal B to test the BLUE light color and 12 volts.
  3. Observe the floor flood lamps assemble for the correct color in the lights.
    NOTE: If one or both lights do not illuminate the proper color, replace the floor flood lamps assembly.
scientia non olet · About LEMON Manuals