Washer Nozzle Replacement - Rear

WASHER NOZZLE REPLACEMENT - REAR

REMOVAL PROCEDURE




1. Remove the center high mounted stop lamp (CHMSL).
2. Disconnect the rear washer nozzle hose from the rear washer nozzle.
3. Rotate the rear washer nozzle 45° counterclockwise and remove the nozzle.

INSTALLATION PROCEDURE




1. Insert the rear washer nozzle into the CHMSL and rotate 45� clockwise to lock the nozzle into position.
2. Connect the rear washer nozzle hose to the rear nozzle. Soapy water may be used as a lubricant to aid in assembly.
3. Install the CHMSL.