Sealing Strip Replacement - Front Door Window Belt Outer

Sealing Strip Replacement - Front Door Window Belt Outer

Removal Procedure




1. Remove the belt seal retaining screw at the rear edge of the door.
2. Remove the outside rearview mirror. Refer to Mirror Replacement (Removal and Replacement).
3. Remove the outer belt seal by lifting up on the seal starting at the rear and working forward.

Installation Procedure




1. Align the outer belt seal fastener location with the hole in the door structure and outer panel retaining tabs.
2. Starting at the rear of the belt seal, push the belt seal down onto the flange until fully seated.
3. Install the outside rearview mirror. Refer to Mirror Replacement (Removal and Replacement).

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the outer belt seal retaining screw.

Tighten the screw to 2 Nm (18 lb in).