Wheel Speed Sensor Replacement - Front

Wheel Speed Sensor Replacement - Front
Removal Procedure





1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the brake rotor.
4. Disconnect the wheel speed sensor electrical connector.





5. Remove the wheel speed sensor bolt.
6. Remove the wheel speed sensor.

Installation Procedure





1. Install the wheel speed sensor to the wheel bearing/hub assembly.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the wheel speed sensor mounting bolt.
Tighten the bolt to 8 Nm (71 inch lbs.).





3. Connect the wheel speed sensor electrical connector.
4. Install the brake rotor.
5. Install the tire and wheel assembly.
6. Lower the vehicle.