Power Mirror Switch: Service and Repair

Power Mirror Switch Replacement

Removal Procedure




1. Remove the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement (Service and Repair) in Instrument Panel, Gages, and Console.
2. Press the locking tabs on the rear of the bezel.
3. Remove the switch from the bezel.

Installation Procedure




1. Align the mirror switch with the shift lever bezel and press into place.
2. Install the bezel. Refer to Console Shift Lever Bezel Replacement (Service and Repair) in Instrument Panel, Gages, and Console.