Seat Belt Buckle Replacement - Front (Side Mount)

SEAT BELT BUCKLE REPLACEMENT - FRONT (SIDE MOUNT)

REMOVAL PROCEDURE
1. Remove the front seat belt retractor pretensioner.
2. Remove the front seat from the vehicle.




3. Remove the seat belt buckle fastener and remove the seat belt buckle.
4. On the driver side, remove the belt buckle wiring clip from the seat adjuster. Remove the seat belt buckle.

INSTALLATION PROCEDURE




1. Install the seat belt buckle and the fastener to the seat adjuster.

NOTE: Refer to Fastener Notice.

IMPORTANT: Apply Permatex(R) 24200 on all restraint fasteners prior to installation.

Tighten the fasteners to 45 N.m (33 lb ft).




2. On the driver side, attach the seat belt wiring clip to the seat adjuster.
3. Install the front seat in the vehicle.




4. Install the front seat belt retractor pretensioner.

IMPORTANT: Verify that the shoulder belt is not twisted.

5. Operate the front seat shoulder belt.