Air Cleaner Fresh Air Duct/Hose: Service and Repair

AIR CLEANER INTAKE DUCT REPLACEMENT

REMOVAL PROCEDURE




1. Remove the front fascia.
2. Remove the inlet duct assembly attachment bolts.




3. Remove the inlet duct assembly.

INSTALLATION PROCEDURE




1. Install the air resonator/duct assembly.




2. Install the air resonator/duct assembly bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the air resonator/duct assembly-to-body to 10 N.m (89 lb in).

3. Install the front fascia.