Front Crankshaft Seal: Service and Repair

Crankshaft Front Oil Seal Replacement

^ Tools Required
- J 35268-A Camshaft/Front Main Seal Installer





1. Remove the crankshaft balancer pulley.
2. Using a seal removal tool or screwdriver, remove the oil seal from the front cover.
^ Clean the seal bore and oil drain back passage way.
^ Ensure that the oil drain back passage is free of RTV or debris.





3. Install a new oil seal using the J 35268-A

^ Important: Always ensure that the oil pump cover is properly supported when installing.

Ensure that the font main oil seal is fully and evenly sealed.
^ Apply a thin film of oil to seal the lip.
4. Install the crankshaft balancer pulley.