Latch Replacement - Instrument Panel (I/P) Compartment

Latch Replacement - Instrument Panel (I/P) Compartment

Removal Procedure




1. Remove the I/P compartment door. Refer to Door Replacement - Instrument Panel (I/P) Compartment (Service and Repair).
2. Remove the compartment latch screws.
3. Remove the latch and rod assembly from the compartment door.

Installation Procedure




1. Position the latch and rod assembly to the handle.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the latch screws.

Tighten the screws to 2 Nm (18 lb in).

3. Install the I/P compartment door. Refer to Door Replacement - Instrument Panel (I/P) Compartment (Service and Repair).