Rear Bumper Fascia Reflector Replacement

Rear Bumper Fascia Reflector Replacement

Removal Procedure

1. Remove the rear fascia. Refer to Fascia Replacement - Rear Bumper (Fascia Replacement - Rear Bumper).




2. Remove the reflector to fascia nut.
3. Remove the reflector from the fascia.

Installation Procedure




1. Position the reflector to the rear fascia.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the reflector to fascia nut.

Tighten the nut to 6 Nm (53 lb in).

3. Install the rear fascia. Refer to Fascia Replacement - Rear Bumper (Fascia Replacement - Rear Bumper).