Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P0030, P0036, P0053, P0054, P0068, P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0120, P0131, P0132, P0133, P0134, P0135, P0137, P0138, P0140, P0141, P0201, P0202, P0203, P0204, P0205, P0206, P0220, P0300, P0401, P0403, P0404, P0405, P0406, P0420, P0442, P0446, P0449, P0451, P0452, P0453, P0454, P0455, P0462, P0463, P0464, P0496, P0506, P0507, P1133, P1134, P1404, P1516, P2101, P2107, P2108, P2119, P2120, P2125, P2135, P2138, P2A00, P2A01 are not set.
The engine is in Closed Loop status.
The Fuel Trim Learn is enabled.
The engine coolant is between -40 and +132 °C (-40 and +270°F).
The intake air temperature (IAT) is between -21 and +150°C (-6 and +302°F).
The manifold absolute pressure (MAP) is between 5-105 kPa (0.7-15.2 psi).
The vehicle speed is between 13-132 km/h (8-82 mph).
The engine speed is between 500-6,000 RPM.
The barometric pressure (BARO) is more than 70 kPa (10.1 psi).
The mass air flow (MAF) is between 0.5-510 g/s.
The scan tool special functions are not active.