Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P0030, P0036, P0053, P0054, P0068, P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0120, P0131, P0132, P0133, P0134, P0135, P0137, P0138, P0140, P0141, P0201, P0202, P0203, P0204, P0205, P0206, P0220, P0300, P0401, P0403, P0404, P0405, P0406, P0420, P0442, P0446, P0449, P0451, P0452, P0453, P0454, P0455, P0462, P0463, P0464, P0496, P0506, P0507, P1133, P1134, P1404, P1516, P2101, P2107, P2108, P2119, P2120, P2125, P2135, P2138, P2A00, P2A01 are not set.
The engine is in Closed Loop status.
Fuel Trim Learn is enabled.
The engine coolant is between -40 and +132 °C (-40 and +270°F).
The intake air temperature (IAT) is between -21 and +150°C (-6 and +302°F).
The manifold absolute pressure (MAP) is between 5-105 kPa (0.7-15.2 psi).
The vehicle speed is less than 132 km/h (82 mph).
The engine speed is between 500-6,000 RPM.
The barometric pressure (BARO) is more than 70 kPa (10.1 psi).
The mass air flow (MAF) is between 0.5-510 g/s.
The fuel level is more than 10 percent.
The scan tool special functions are not active.