Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0125, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0220, P0442, P0443, P0446, P0449, P0451, P0452, P0453, P0454, P0455, P0464, P0496, P2135 are not set.
DTCs P0401, P0420, and P2A01 are not commanding fuel.
The system voltage is between 9-18 volts.
The scan tool special functions are not active.
The HO2S 1 Heater parameter is ON.
The Engine Run Time parameter is more than 2 minutes.