LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Relay 3.9 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls - 3.5L - Introduction (2 Of 2)) >> Description and Operation >> Electronic Ignition (EI) System Description >> Camshaft Position (CMP) Sensor

Camshaft Position (CMP) Sensor

WARNING: This page is about a different variant/trim than selected.

The camshaft position (CMP) sensor signal is a digital ON/OFF pulse output once per revolution of the camshaft. The CMP sensor does not directly affect the operation of the ignition system. The CMP sensor information is used by the powertrain control module (PCM) to determine the position of the valve train relative to the crankshaft position. By monitoring the CMP and crankshaft position (CKP) signals, the PCM can accurately time the operation of the fuel injectors. The PCM supplies the sensor with a 12-volt reference circuit, a low reference circuit, and a signal circuit.

scientia non olet · About LEMON Manuals