LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Relay 3.9 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 3.5L) >> Repair Instructions - On Vehicle >> Valve Lifter Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the lower intake manifold. Refer to Lower Intake Manifold Replacement .
  2. Remove the valve rocker arms and pushrods. Refer to Valve Rocker Arm and Push Rod Replacement .
    3. Fig 1: Intake Manifold Oil Splash Shield
    GM645872Courtesy of GENERAL MOTORS CORP.
  3. Remove the intake manifold oil splash shield.
    4. Fig 2: View Of Lifter Guide
    GM61836Courtesy of GENERAL MOTORS CORP.
  4. Remove the lifter guide bolts.
  5. Remove the valve lifter guides.
  6. Remove the valve lifters.
  7. Clean all gasket surfaces with degreaser.
  8. Clean the valve train parts.
  9. Inspect the valve lifters and the cam lobes for wear. Refer to Valve Lifters Cleaning and Inspection .
scientia non olet · About LEMON Manuals