Tools Required
WARNING: This page is about a different variant/trim than selected.
J 41131 Engine Tilt Strap. See Special Tools .
- Remove the throttle body air inlet duct. Refer to Air Cleaner Inlet Duct Replacement in Engine Controls - 3.5L.
- Set the park brake.
- Shift the transaxle into Neutral.
- Remove the engine mount strut bolts. Swing the engine mount struts aside. Refer to Engine Mount Strut Replacement - Left Side and Engine Mount Strut Replacement - Right Side .
- Install the J 41131 . See Special Tools .
- Pull on the engine in order to rotate the engine forward.
- Tighten the J 41131 . See Special Tools .