LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Relay 3.9 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 3.5L) >> Repair Instructions - On Vehicle >> Fuel Injector Sight Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Removing/Installing Fuel Injector Sight Shield
    GM1544722Courtesy of GENERAL MOTORS CORP.
  1. Install the injector sight shield (3).
  2. Install the oil fill neck (1).
  3. Install the oil fill cap (2).