Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Fig 1: View Of Bolt & Nut For Engine Mount Strut At Engine Mount Strut Bracket On Upper Radiator Support

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the bolt and the nut to the engine mount strut at the engine mount strut bracket on the upper radiator support.
Tighten: Tighten the engine mount strut bolt to 48 N.m (36 lb ft).

Fig 2: Locating Bolt & Nut For Engine Mount Strut At Right Engine Mount Strut Bracket

Courtesy of GENERAL MOTORS CORP.

Install the bolt and the nut to the engine mount strut at the right engine mount strut bracket on the engine.
Tighten: Tighten the engine mount strut nut to 48 N.m (36 lb ft).