LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Relay 3.9 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 3.5L) >> Repair Instructions - On Vehicle >> Engine Mount Strut Bracket Replacement - Right Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Locating Bolt & Nut For Engine Mount Strut At Right Engine Mount Strut Bracket
    GM105887Courtesy of GENERAL MOTORS CORP.
  1. Remove the right engine mount strut from the right engine mount strut bracket. Refer to Engine Mount Strut Replacement - Right Side .
    2. Fig 2: Identifying Engine Mount Strut Bracket Bolt
    GM190592Courtesy of GENERAL MOTORS CORP.
  2. Remove the engine oil cooler coolant line bracket bolt, if equipped.
  3. Remove the engine wiring harness bracket bolt.
  4. Remove the drive belt. Refer to Drive Belt Replacement .
    5. Fig 3: Locating Air Conditioning Compressor Mounting Bolts
    GM277918Courtesy of GENERAL MOTORS CORP.
  5. Remove the air conditioning compressor mounting bolts.
  6. Remove and set the air conditioning compressor aside.
    7. Fig 4: View Of Lower Engine Mount Strut Bracket Bolt
    GM155767Courtesy of GENERAL MOTORS CORP.
  7. Remove the vertical engine mount strut bracket bolt from the right engine mount strut bracket.
  8. Remove the lower engine mount strut bracket bolt from the right engine mount strut bracket.
  9. Remove the right engine mount strut bracket.
scientia non olet · About LEMON Manuals