LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Relay 3.9 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 3.5L) >> Repair Instructions - On Vehicle >> Drive Belt Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Rotating Drive Belt Tensioner
    GM368807Courtesy of GENERAL MOTORS CORP.
  1. Install the drive belt to all of the pulleys except the generator pulley.
  2. Rotate the drive belt tensioner counterclockwise to release the spring tension.
    3. Fig 2: Illustrating Proper Alignment Of Drive Belt
    GM368806Courtesy of GENERAL MOTORS CORP.
  3. Install the drive belt. over the generator pulley.
  4. Ensure that the drive belt is properly routed.
scientia non olet · About LEMON Manuals