LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Relay 3.9 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 3.5L) >> Repair Instructions - Off Vehicle >> Piston Oil Nozzle Installation

Piston Oil Nozzle Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Piston Oil Nozzle
    GM1579794Courtesy of GENERAL MOTORS CORP.
  1. Position the piston oil nozzle into the engine block.
    2. NOTE: Refer to Fastener Notice .
  2. Install the bolt retaining the piston oil nozzle to the engine block.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

scientia non olet · About LEMON Manuals