LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Relay 3.9 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 3.5L) >> Repair Instructions - Off Vehicle >> Oil Pump Drive Installation

Oil Pump Drive Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Oil Pump Drive
    GM187033Courtesy of GENERAL MOTORS CORP.
  1. Apply prelube P/N 12345501 or the equivalent to the oil pump drive gear.
  2. Apply engine oil to the oil pump drive gear assembly for ease of assembly.
  3. Install the oil pump drive gear assembly.
  4. Install the oil pump drive gear clamp.
    5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the oil pump drive gear clamp bolt.

    Tighten:  Tighten the oil pump drive gear clamp bolt to 36 N.m (27 lb ft).

scientia non olet · About LEMON Manuals