LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Relay 3.9 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 3.5L) >> Repair Instructions - Off Vehicle >> Engine Mount Strut and Engine Lift Bracket Installation

Engine Mount Strut and Engine Lift Bracket Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Engine Mount Strut & Lift Bracket
    GM192658Courtesy of GENERAL MOTORS CORP.
  1. Install the engine mount strut and lift bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Install the engine mount strut and lift bracket bolts.

    Tighten:  Tighten the engine mount strut and lift bracket bolts to 70 N.m (52 lb ft).

scientia non olet · About LEMON Manuals