LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Relay 3.9 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 3.5L) >> Repair Instructions - Off Vehicle >> Crankshaft Front Oil Seal Installation >> Tools Required

Tools Required

WARNING: This page is about a different variant/trim than selected.

J 35468  Cover Aligner and Seal Installer. See Special Tools .

    Fig 1: Installing Crankshaft Front Oil Seal
    GM187026Courtesy of GENERAL MOTORS CORP.
  1. Align the J 35468  and the crankshaft front oil seal with the engine front cover and crankshaft. See Special Tools .
  2. Install the crankshaft front oil seal using the J 35468  and a suitable tool. See Special Tools .
scientia non olet · About LEMON Manuals