LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Relay 3.9 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 3.5L) >> Repair Instructions - Off Vehicle >> Camshaft Bearing Removal >> Tools Required

Tools Required

WARNING: This page is about a different variant/trim than selected.

J 33049  Camshaft Bearing Service Set. See Special Tools .

    Fig 1: Camshaft Bearing Service Set
    GM622704Courtesy of GENERAL MOTORS CORP.
  1. Select the expander assembly and driving washer.
  2. Assemble the J 33049  . See Special Tools .
    3. Fig 2: Removing/Installation Camshaft Inner Bearing Using J 33049
    GM4985Courtesy of GENERAL MOTORS CORP.
  3. Drive out the camshaft bearings. Use the J 33049  . See Special Tools .
scientia non olet · About LEMON Manuals