LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Relay 3.5 L, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Fluid Level Indicator Switch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Master Cylinder Fluid Level Sensor Electrical Connector
    GM385563Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (2) from the fluid level sensor (1).
    2. Fig 2: Removing Brake Fluid Level Sensor
    GM176836Courtesy of GENERAL MOTORS CORP.
  2. Remove the fluid level sensor (1). Use needle nose pliers in order to compress the switch locking tabs at the outboard side of the master cylinder.
scientia non olet · About LEMON Manuals