LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Relay 3.5 L, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Fluid Level Indicator Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Locating Master Cylinder Fluid Level Sensor
    GM241616Courtesy of GENERAL MOTORS CORP.
  1. Install the fluid level sensor (1) until the locking tabs snap into place.
  2. Connect the electrical connector to the fluid level sensor (1).
scientia non olet · About LEMON Manuals