Front Seat Cushion Cover and Pad Replacement

Fig 1: View Of Front Seat Cushion Cover & Pad

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front bucket seat. Refer to Front Seat Replacement - Bucket .
1	Seat Recliner Handle Refer to Driver Seat Recliner Handle and Passenger Seat Recliner Handle Replacement .
2	Seat Recliner Handle Plug
3	Seat Outer Adjuster Cover Refer to Front Seat Adjuster Track Finish Cover Replacement .
4	Seat Tray Assembly Refer to Front Seat Storage Tray Replacement .
5	Seat Outer Adjuster Cover Refer to Front Seat Adjuster Track Finish Cover Replacement .
6	Seat Inner Adjuster Cover Refer to Front Seat Adjuster Track Finish Cover Replacement .
7	Seat Back Recliner Bolts (Qty: 4) NOTE: Refer to Fastener Notice in Cautions and Notices. Tighten: 48 N.m (35 lb ft)
8	Seat Back Assembly
9	Seat Cushion Frame Assembly Refer to Driver Seat Frame Replacement or Passenger Seat Frame Replacement .
10	Seat Cushion Assembly
11	Seat Cushion Cover Tip: The seat cushion cover is secured to the seat cushion with hog rings that must be removed when replacing the cover. For the passenger seat, re-zero the inflatable restraint passenger presence system. Refer to Passenger Presence System Programming and Setup .