Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Air Deflector Screws | 6 N.m | 53 lb in |
| Diagonal Brace Front Bolts | 14 N.m | 124 lb in |
| Diagonal Brace Rear Bolt | 47 N.m | 35 lb ft |
| Front Fender Lower Bracket Nut | 6 N.m | 53 lb in |
| Front Fender Lower Front Bolts | 8 N.m | 71 lb in |
| Front Fender Lower Rear Bolts | 8 N.m | 71 lb in |
| Front Fender Rear Bolts | 8 N.m | 71 lb in |
| Front Fender Upper Bolts | 8 N.m | 71 lb in |
| Front Wheelhouse Liner Screws | 2 N.m | 18 lb in |
| Headlamp and Front End Fascia Mounting Panel Bolts | 12 N.m | 106 lb in |
| Headlamp and Front End Fascia Mounting Panel Outer Bracket Bolts | 12 N.m | 106 lb in |
| Hood Hinge to Hood Bolts | 25 N.m | 18 lb ft |
| Hood Hinge to Upper Fender Rail Bolts | 25 N.m | 18 lb ft |
| Hood Hold Open Rod Bracket Bolt | 10 N.m | 89 lb in |
| Hood Primary and Secondary Latch Nuts | 12 N.m | 106 lb in |
| Hood Primary Latch Bolts | 12 N.m | 106 lb in |
| Hood Release Handle Screws | 2 N.m | 18 lb in |