Indicator/Warning Message Description and Operation
Indicators
| Symbol | Description |
|---|---|
| ABS: Refer to ABS Description and Operation | |
| Air Bag: Refer to SIR System Description and Operation | |
| BRAKE | Brake: Refer to Brake Warning System Description and Operation |
| Charge: Refer to Charging System Description and Operation | |
| Cruise: Refer to Cruise Control Description and Operation (3.5L) or Cruise Control Description and Operation (3.9L) | |
| Engine Coolant Temperature: Refer to Cooling System Description and Operation | |
| Fasten Seat Belts: Refer to Seat Belt System Description and Operation | |
| Fasten Passenger Seat Belts: Refer to Seat Belt System Description and Operation | |
| High Beam: Refer to Exterior Lighting Systems Description and Operation | |
| The instrument panel cluster (IPC) illuminates the LOW FUEL message in the message center and the LOW FUEL indicator in the IPC when the powertrain control module (PCM) determines that the fuel level is less than 8.2 percent. The IPC receives a class 2 message indicating the fuel level from the PCM. | |
| The instrument panel cluster (IPC) illuminates the LOW ENGINE OIL PRESSURE indicator in the IPC when the powertrain control module (PCM) detects low engine oil pressure, and the signal circuit is low. The IPC receives a class 2 message requesting the indicator illumination from the PCM. | |
| Malfunction Indicator Lamp (MIL): Refer to Powertrain Control Module Description | |
| Passenger Air Bag Off: Refer to SIR System Description and Operation | |
| Passenger Air Bag On: Refer to SIR System Description and Operation | |
| Security: Refer to Content Theft Deterrent (CTD) Description and Operation | |
| Traction Control Off: Refer to ABS Description and Operation | |
| Turn Signals: Refer to Exterior Lighting Systems Description and Operation |
DIC Warning Messages
| Symbol | Description |
|---|---|
| A/C Off For Engine Protection | Refer to Cooling System Description and Operation |
| All Wheel Drive Disabled | Refer to Locking Differential Description and Operation |
| Battery Saver Active | Refer to Charging System Description and Operation |
| Change Oil Soon | The instrument panel cluster (IPC) illuminates the CHANGE OIL SOON message in the message center when the powertrain control module (PCM) determines that the engine oil needs to changed. The PCM sends a class 2 message to the IPC requesting warning message illumination. After the oil is changed, reset the engine oil monitor. Refer to GM Oil Life System Resetting . |
| Charging System Failure | Refer to Charging System Description and Operation |
| Check Gas Cap | Refer to Evaporative Emission Control System Description |
| Delayed Locking | Refer to Power Door Locks Description and Operation |
| Door Ajar - Driver | Refer to Door Ajar Indicator Description and Operation |
| Door Ajar - Left Rear | Refer to Door Ajar Indicator Description and Operation |
| Door Ajar - Passenger | Refer to Door Ajar Indicator Description and Operation |
| Door Ajar - Right Rear | Refer to Door Ajar Indicator Description and Operation |
| Engine Coolant Hot | Refer to Cooling System Description and Operation |
| Headlamps Suggested | Refer to Exterior Lighting Systems Description and Operation |
| Hood Ajar | Refer to Starting System Description and Operation |
| Key Fob Battery Low | Refer to Theft Systems Description and Operation |
| Key In Ignition | Refer to Steering Wheel and Column Description and Operation |
| Left Front Turn Lamp Out | Refer to Exterior Lighting Systems Description and Operation |
| Left Rear Turn Lamp Out | Refer to Exterior Lighting Systems Description and Operation |
| Liftgate Open | Refer to Rear Quarter Window Description and Operation |
| Low Brake Fluid | Refer to Brake Warning System Description and Operation |
| Low Fuel | The instrument panel cluster (IPC) illuminates the LOW FUEL message in the message center and the LOW FUEL indicator in the IPC when the powertrain control module (PCM) determines that the fuel level is less than 8.2 percent. The IPC receives a class 2 message indicating the fuel level from the PCM. |
| Low Oil Level | The instrument panel cluster (IPC) illuminates the LOW OIL LEVEL message in the message center if the powertrain control module (PCM) detects low engine oil level. The IPC receives a class 2 message requesting illumination from the PCM. |
| Low Oil Pressure | The instrument panel cluster (IPC) illuminates the LOW OIL PRESSURE message in the message center when the powertrain control module (PCM) detects low engine oil pressure, and the signal circuit is low. The IPC receives a class 2 message requesting the warning message illumination from the PCM. |
| Low Washer Fluid | Refer to Wiper/Washer System Description and Operation |
| Overspeed | The instrument panel cluster (IPC) illuminates the OVERSPEED indicator when the IPC detects that the vehicle speed is more than 120 km/h (75 mph). |
| Parking Brake On | Refer to Park Brake System Description and Operation |
| Park Lamps On | Refer to Exterior Lighting Systems Description and Operation |
| Passenger Seatbelt Not Fastened | Refer to Seat Belt System Description and Operation |
| Reduced Engine Power | Refer to Powertrain Control Module Description |
| Remote Start Active | Refer to Starting System Description and Operation |
| Remote Start Disabled | Refer to Starting System Description and Operation |
| Remote Start Failed | Refer to Starting System Description and Operation |
| Right Front Turn Lamp Out | Refer to Exterior Lighting Systems Description and Operation |
| Right Rear Turn Lamp Out | Refer to Exterior Lighting Systems Description and Operation |
| Service ABS System | Refer to ABS Description and Operation |
| Service Brake System | Refer to ABS Description and Operation |
| Service Park Lamps | Refer to Exterior Lighting Systems Description and Operation |
| Service Remote Start | Refer to Starting System Description and Operation |
| Service Stability System | Refer to ABS Description and Operation |
| Service Traction System | Refer to ABS Description and Operation |
| Service Vehicle Soon | The driver information center (DIC) illuminates the SERVICE VEHICLE SOON indicator when the powertrain control module (PCM) detects certain malfunctions that are not related to the emissions system. The DIC receives a class 2 message requesting warning message illumination from the PCM. |
| Stability Control Active | Refer to ABS Description and Operation |
| Stability Control Off | Refer to ABS Description and Operation |
| Starting Disabled | Refer to Throttle Actuator Control (TAC) System Description |
| Traction Control Active | Refer to ABS Description and Operation |
| Traction Control Off | Refer to ABS Description and Operation |
| Transmission Hot | Refer to Transmission General Description |
| Turn Signal On | Refer to Exterior Lighting Systems Description and Operation |