LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Ion 1 Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster >> Installation Procedure

Installation Procedure

  1. Align the retaining fasteners with the center trim panel.
  2. Push on the outer edge of the cluster trim plate in order to secure the retaining fasteners.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the screw retaining the cluster trim plate to the center trim panel.

    Tighten:  Tighten the cluster trim plate screw to 2.5 N.m (22 lb in).

    4. Fig 1: View Of Cluster Trim Plate
    GM877802Courtesy of GENERAL MOTORS CORP.
  4. Connect the accessory trim plate electrical connector(s).
    5. Fig 2: View Of Accessory Trim Plate Electrical Connectors
    GM877774Courtesy of GENERAL MOTORS CORP.
  5. Align the retaining fasteners with the I/P.
  6. Push on the outer edge of the accessory trim plate in order to secure the retaining fasteners.
    7. Fig 3: Instrument Panel Bezel/Trim Plate
    GM877771Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals