LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Ion 1 Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Handle Replacement - Instrument Panel (I/P) Compartment >> Installation Procedure

Installation Procedure

  1. Install the I/P compartment handle.
  2. Slide the I/P compartment handle retaining clip to the left to lock the handle in place.
    3. Fig 1: View Of I/P Compartment Handle
    GM877791Courtesy of GENERAL MOTORS CORP.
  3. Install the I/P compartment latch rod.
    4. Fig 2: View Of I/P Compartment Latch Rod
    GM877789Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the I/P compartment latch and screws.

    Tighten:  Tighten the I/P compartment latch screws to 2.5 N.m (22 lb in).

    5. Fig 3: View Of I/P Compartment Latch Screws & Latch
    GM877785Courtesy of GENERAL MOTORS CORP.
  5. Install the I/P compartment latch access panel.
    6. Fig 4: View Of I/P Compartment Latch Access Panel
    GM877784Courtesy of GENERAL MOTORS CORP.
  6. Close the I/P compartment.
scientia non olet · About LEMON Manuals