Removal Procedure

If equipped with an automatic or VTi transmission, apply the park brake and shift the transmission into neutral.
If equipped with an automatic or VTi transmission, remove the console shift lever bezel by carefully lifting up around the outside edge.

Fig 1: View Of Shift Lever Bezel

Courtesy of GENERAL MOTORS CORP.

If equipped with a manual transmission, unsnap the shift boot from the front console cupholder.

Fig 2: View Of Shift Boot

Courtesy of GENERAL MOTORS CORP.

Fig 3: View Of Cigar Lighter Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the cigar lighter electrical connector.
Remove the front console cupholder. If equipped with a manual transmission, slide the shift boot through the front console cupholder.

Fig 4: View Of Front Console Cupholder

Courtesy of GENERAL MOTORS CORP.

Remove the left console side extension retainer. Turn the retainer counterclockwise to remove.
Remove the right console side extension retainer. Turn the retainer counterclockwise to remove.

Fig 5: View Of Console Side Extension Retainer

Courtesy of GENERAL MOTORS CORP.

Remove the left console side extension by pulling the console side extension rearward to disengage from the console.

Fig 6: View Of Console Side Extension

Courtesy of GENERAL MOTORS CORP.

Remove the right console side extension by pulling the console side extension rearward to disengage from the console.
Remove the console center extension screws.

Fig 7: View Of Console Center Extension Screws

Courtesy of GENERAL MOTORS CORP.

Pull out on the console center extension to disengage the retaining fasteners and remove the extension.