Removal Procedure
- Remove the left and right instrument panel (I/P) outer trim covers. Refer to Instrument Panel (I/P) Outer Trim Cover Replacement .
- Pull out on the accessory trim plate in order to release the retaining fasteners.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the accessory trim plate electrical connectors.
Courtesy of GENERAL MOTORS CORP.
- Remove the screw retaining the cluster trim plate to the center trim panel.
- Lift up on the cluster trim plate to release the retaining fasteners.
- Remove the cluster trim plate.
Courtesy of GENERAL MOTORS CORP.
- Remove the left and right windshield garnish moldings. Refer to Windshield Garnish Molding Replacement
in Interior Trim.
- Remove the defroster grille bolt covers.
Courtesy of GENERAL MOTORS CORP.
- Remove the defroster grille center bolts and the outer screws.
- Lift up on the defroster grille to release the retaining fasteners.
Courtesy of GENERAL MOTORS CORP.
- If equipped, turn the ambient light sensor body clockwise to remove the sensor from the defroster grille.
Courtesy of GENERAL MOTORS CORP.
- Remove the defroster grille.