Removal Procedure
- If equipped with an automatic or VTi transmission, apply the park brake and shift the transmission into neutral.
- If equipped with an automatic or VTi transmission, remove the console shift lever bezel by carefully lifting up around the outside edge.
Courtesy of GENERAL MOTORS CORP.
- If equipped with a manual transmission, unsnap the shift boot from the front console cupholder.
Courtesy of GENERAL MOTORS CORP.
- Lift the front console cupholder to disengage the retaining fasteners.
- Disconnect the cigar lighter electrical connector.
Courtesy of GENERAL MOTORS CORP.
- Remove the front console cupholder. If equipped with a manual transmission, slide the shift boot through the front console cupholder.
Courtesy of GENERAL MOTORS CORP.