Installation Procedure
- If equipped with a manual transmission, slide the shift boot through the front console cupholder.
- Connect the cigar lighter electrical connector.
Courtesy of GENERAL MOTORS CORP.
- Align the retaining fasteners on the front console cupholder with the console.
- Push the front console cupholder to secure.
Courtesy of GENERAL MOTORS CORP.
- If equipped with a manual transmission, snap the shift boot to the front console cupholder.
Courtesy of GENERAL MOTORS CORP.
- If equipped with an automatic or VTi transmission, align the fingers on the shift lever bezel with the slots on the shift lever base. Push the console shift lever bezel to secure.
Courtesy of GENERAL MOTORS CORP.
- If equipped with an automatic or VTi transmission, shift the transmission into Park.